SCT-199I-P

3/4" NPT 199000BTU/Hr 10GPM Ultra-Low Nox Burner Direct/Power Vent Indoor High Efficiency Condensing Tankless Propane Gas Water Heater

Manufacturer Name: State Industries
VAMAC PN: 257434
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Condensing Tankless Water Heater; Type Indoor, High Efficiency; Inlet/Outlet Connection 3/4 Inch Threaded; Gas Type Propane; Gas Connection 3/4 Inch Threaded; Venting Type Direct, Power; Draft Hood Outlet/Vent Size 3 Inch or 4 Inch; Input Supply Rating 199000 BTU/Hour; Tank Dimensions 17-3/4 Inch Width x 11-1/4 Inch Depth x 23-5/8 Inch Height; Ignition Type Electronic Spark; Burner Type Ultra-Low Nox; Energy Saver Conformance Yes; Options Pipe Cover, Neutralizer Kit, Isolation Valve Kits, Concentric Termination; Inclusions/Features Integrated Temperature Controller and Advanced Diagnostics to Simplify Troubleshooting, Factory-Installed Power Cord; Applicable Standard ANSI Z21.10.3, ASHRAE, AHRI, CSA 4.3, NSF, SCAQMD 1146.2; Flow Rate 10 GPM; Energy Factor 0.93; Application Residential/Commercial

    Applicable Standard      :      ANSI Z21.10.3, ASHRAE, AHRI, CSA 4.3, NSF, SCAQMD 1146.2
    Burner Type      :      Ultra-Low Nox
    Draft Hood Outlet/Vent Size      :      3 Inch or 4 Inch
    Energy Saver Conformance      :      Yes
    Gas Connection      :      3/4 Inch Threaded
    Gas Type      :      Propane
    Ignition Type      :      Electronic Spark
    Inclusions/Features      :      Integrated Temperature Controller and Advanced Diagnostics to Simplify Troubleshooting, Factory-Installed Power Cord
    Inlet/Outlet Connection      :      3/4 Inch Threaded
    Input Supply Rating      :      199000 BTU/Hour
    Options      :      Pipe Cover, Neutralizer Kit, Isolation Valve Kits, Concentric Termination
    Tank Dimensions      :      17-3/4 Inch Width x 11-1/4 Inch Depth x 23-5/8 Inch Height
    Type      :      Indoor, High Efficiency
    Venting Type      :      Direct, Power
  • Ultra-Low Nox Condensing Technology Provides up to 0.95 Uniform Energy Factor
  • Durable Heat Exchanger - Primary Heat Exchanger is Constructed of Commercial-Grade Copper that is More Resilient to Erosion and is 25x Better at Heat Transfer than Stainless Steel Thus Stabilizing Outgoing Water Temperatures Quicker
  • Secondary Heat Exchanger is Made of Type 316L Stainless Steel to Protect Against Corrosion
  • Air Fuel Ratio (AFR) Sensor
  • Exhaust and Water Temperature Safety Control
  • Overheat Cut-Off Fuse
  • Internal Freeze Protection System
  • Energy Star Rated
  • Package Weight      :      71.0
    Package Weight Uom      :      Pound
    Package Quantity      :      1