MW50-21

1/2HP 230V 1PH 135GPM 60Hz 2" NPT Outlet 4.5A 1625RPM Non-Automatic Sewage Pump

Manufacturer Name: Myers
VAMAC PN: 8882
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sewage Pump; Type Non-Automatic; Discharge Size 2 Inch; End Connection Threaded Outlet; Overall Dimensions 11.42 Inch Length x 9.04 Inch Width x 14.76 Inch Height; Float Type Wide-Angle Mercury-Free Piggyback; Flow Rate 135 GPM; Discharge Head 27 Foot; Casing Material Cast Iron; Housing Material Cast Iron; Impeller Material Thermoplastic; Impeller Design Non-Clog; Warranty 2 Year Limited; Shaft Seal Details Carbon/Ceramic Mechanical Seal; Solid Size 2 Inch; Power Cord Length 20 Foot; Power Rating 1/2 HP; Input Supply Rating 230 Volt AC at 60 Hertz 1-Phase; Speed Rating 1625 RPM; Temperature Rating 140 Deg F; Motor Type Oil-Filled, Permanent Split Capacitor; Inclusions/Features Tethered, Piggyback Mechanical Float Switch; Application Residential and Light Commercial; Applicable Standard UL 778, CSA 108; Switch Type Manual; Liquid Handling Domestic Sewage and Drain Water; Minimum Sump Diameter 24 Inch (Simplex), 36 Inch (Duplex)

    Applicable Standard      :      UL 778, CSA 108
    Application      :      Residential and Light Commercial
    Casing Material      :      Cast Iron
    Discharge Head      :      27 Foot
    Discharge Size      :      2 Inch
    End Connection      :      Threaded Outlet
    Float Type      :      Wide-Angle Mercury-Free Piggyback
    Flow Rate      :      135 GPM
    Housing Material      :      Cast Iron
    Impeller Design      :      Non-Clog
    Impeller Material      :      Thermoplastic
    Inclusions/Features      :      Tethered, Piggyback Mechanical Float Switch
    Input Supply Rating      :      230 Volt AC at 60 Hertz 1-Phase
    Motor Type      :      Oil-Filled, Permanent Split Capacitor
    Overall Dimensions      :      11.42 Inch Length x 9.04 Inch Width x 14.76 Inch Height
    Power Cord Length      :      20 Foot
    Power Rating      :      1/2 HP
    Shaft Seal Details      :      Carbon/Ceramic Mechanical Seal
    Solid Size      :      2 Inch
    Speed Rating      :      1625 RPM
    Temperature Rating      :      140 Deg F
    Type      :      Non-Automatic
    Warranty      :      2 Year Limited
  • Enclosed Design for High-Efficiency Pumping
  • Eliminates Possibility of Jamming Between Impeller and Volute
  • Passes Full 2 Inch Solids
  • Original Performance Can be Restored If Wear Occurs by Replacing Volute Seal Ring
  • Oil-Filled Motor for Maximum Heat Dissipation and Continuous Bearing Lubrication
  • Package Weight      :      42.0
    Package Weight Uom      :      Pound
    Package Quantity      :      1